Jeep Wrangler Antenna Problems and Solutions: Know The Right Ways to Solve!

The significant Jeep Wrangler Antenna problems are weak reception, wind noise, antenna damage, and amplifier failure. It’ll stop working if these problems occur to your antenna. 

To tune your FM on your jeep without interruption, you must fix it right now. We know it’s pretty difficult to diagnose these malfunctions and solve them. And taking it to the service centers for every issue is impossible. So, finding solutions you can try at home is necessary. 

However, we’ve talked to the professionals to find the best possible solutions to help you and develop a detailed guide to Jeep Wrangler Antenna problems and solutions.

Jeep Wrangler Antenna Problems and Solutions 

Before examining the problem, one should clarify how to differentiate the radio and antenna problems individually. Hence, the table below will show you the possible causes for the Jeep Wrangler antenna problems and their respective fixes that you can apply.

CausesFixes
Poor antenna receptionCheck the connection of the antenna with the radio
Any damage in the antennaTry to repair the damaged part or replace with a new one
Wind noise coming out of the antennaTighten the antenna joint or use a silencer
Antenna amplifier malfunctioningInspect the antenna condition and the fuse

Jeep Wrangler Antenna Problems and Solutions: In-Depth Discussion

Now that you know the brief, it’s time to draw an in-depth discussion of fixing each problem as efficiently as possible.

1. Poor Antenna Reception

Poor Antenna Reception
One of the main antenna issues related to the radio antenna is poor reception all of a sudden. An antenna base with poor reception of signals will enable the radio to produce more noise or dissipation in the signal power.

One of the main antenna issues related to the radio antenna is poor reception all of a sudden. An antenna base with poor reception of signals will enable the radio to produce more noise or dissipation in the signal power.

Fix

If you experience that your Jeep Wrangler antenna can’t receive signals to its full strength, then you must check the connections of the antenna with the radio.

See also  What is A Telescope Antenna?: The Ins And Outs You Didn’t Know About

Once you ensure the antenna connection is firm, try out a different radio station or location to check the signal-receiving strength of the antenna.

If none of the above methods works, you must be certain that your antenna has malfunctioned and needs immediate replacement.

2. Damage Inside the Antenna

Damage Inside the Antenna

Truthfully, the antenna on your Wrangler may not be durable enough to face obstacles such as trees with low branches, car wash, or any violent driving accident. Following that, if the Wrangler’s antenna breaks or bends, the equivalent radio reception will be unsatisfactory.

Fix

If the antenna is temporarily damaged, you can fix it by reshaping it to its original shape. After that, wrapping the broken part of the antenna with Aluminium foil might restore the signal-receiving capability.

Apart from that, if the problem is still not fixed, one must understand that the damage to the antenna is permanent and needs a replacement from Wrangler’s local store or any other well-known aftermarket antenna shop.

3. Wind Noise Coming Out of the Antenna

Another antenna issue most common in every model of Jeep Wrangler is that the antenna performance might degrade due to wind noise coming out of it. 

The reason behind the wind noise is the antenna is loosely connected to the front of the Wrangler.

This wind noise is highly noticeable when the riders ride their Wrangler at a very high speed and, in the long run, deteriorates the antenna performance.

Fix

There are various ways to reduce the wind noise from the antenna. They’re as follows:

  • Tighten the Antenna

First and foremost, the primary fix to the wind noise of a Jeep Wrangler is to tighten the antenna screws or any other joints firmly so as to make sure there are no loose connections.

  • Use A Stubby Antenna
See also  How Do I Connect My Samsung TV To An HDTV Antenna- 5 Easy Steps!

A stubby antenna has a shorter antenna mast (height) than usual but is resistant to wind noise. Though a stubby antenna has low radio reception, those focusing only on wind noise can go for it.

  • Use An Antenna Silencer

An antenna silencer is a foam pad that’s usually attached to the antenna base. It absorbs any mechanical impact provided by the car and hence reduces the wind noise to a significant level.

  • Use A Wind Deflector

Additionally, you can also use a wind deflector to redirect the airflow away from the antenna. Hence, you’ll notice that your antenna’s signal reception has reached the expected level.

  • Setting the Antenna to A Different Orientation

The common fix to the wind noise might be setting the antenna to a different orientation. In such a case, the antenna will not face any unwanted wind blows, thus reducing the wind noise for the antenna rod.

4. Antenna Amplifier Malfunctioning

Antenna Amplifier Malfunctioning
Antenna Amplifier

A bad antenna amplifier might also be the cause behind the poor signal strength of the Wrangler’s antenna. Hence, to fix the amplifier, one must follow some steps. Otherwise, you need to replace the amplifier as well.

Fix

First of all, one must make sure that the connections are firm. After that, apply the connections and check the reading on the radio. If the problem is still not fixed, you must test the antenna by removing it from the Wrangler and reconnecting it with a multimeter.

If the multimeter reading is considerable, then you can be certain your amplifier is still functional.

Another way to check the condition of the amplifier is by checking the fuse that is mounted to power the amplifier. If the fuse is blown, then the amplifier is not getting the power to function.

See also  TV Antenna That Picks Up Cable Channel 

Hence, the owner must replace the blown fuse with a new one with the same ampere rating and then apply the voltage to the amplifier. Both your amplifier and the antenna should perform smoothly by now.

Apart from all the fixes mentioned above, if the antenna still does not output the expected performance, one might change the Jeep Wrangler antenna as soon as possible.

Cost of Jeep Wrangler Antenna Replacement

The cost of replacing an antenna solely depends on Jeep Wranglers (different year models). Additionally, the antenna cost will vary depending on the type of antenna you want to choose.

So, the range of Jeep Wrangler antennas starts from $20 to $100. The replacement budget further increases depending on the labor cost. But, those installing the antenna alone can save their labor cost budget ($50 to $100).

On average, replacing a Jeep Wrangler antenna costs about $70. Our suggestion will be to conduct intensive research about the cost and find your most preferable budget.

Conclusion

Instead of purchasing a brand new antenna, first, try to inspect your old one because now you have all the ideas related to Jeep Wrangler antenna problems and solutions.

Many owners might think there are loose connections or the wind noise is too high. But, a bad amplifier might also disrupt the radio reception of the antenna. Check the fuse condition while checking for the amplifier because such unwanted high currents damage the fuse more often.

To wrap up, if any of the above solutions don’t work, we hate delivering the bad news, but you must mostly need to replace your Wrangler’s antenna. Based on our research, the cost is affordable.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top